Click2Extrude 2018 릴리즈

알테어의 차세대 압출 시뮬레이션 클릭2익스트루드(Click2Extrude)!
더욱 스마트해진 클릭2익스트루드 2018이 업데이트 되었습니다.

현재 압출 공정은 생산 비용 절감과 동시에, 짧은 제품 개발 주기를 요구하고 있습니다. 클릭2익스트루드는 압출 설계에 대한 유효성을 해석하기 위한 압출 전문 시뮬레이션 프로그램입니다.

클릭2익스트루드는 CAD 기반의 인터페이스를 갖추고 있으며, 백그라운드에서 자동으로 메시를 생성해주어, 더욱 쉽고 빠르게 결과를 해석할 수 있는 차세대 압출 시뮬레이션이라고 할 수 있습니다.

클릭2익스트루드 2018의 자세한 내용은 릴리즈 노트를 참조하시기 바랍니다.

클릭2익스트루드 2018 메탈 릴리즈 노트 다운받기
클릭2익스트루드 2018 폴리머 릴리즈 노트 다운받기



클릭2익스트루드 2018 공식 업데이트의 상세한 내용은 아래와 같습니다.

.

Click2Extrude 2018 Metal
General Enhancements

These enhancements apply to extrusion, tool deflection, and quenching tabs.

New File Extensions

The model files will be saved now with extension *.c2em, where c2em stands for “Click2Extrude Metal”. The interface will continue to support opening old *.stmod and other geometry formats. Having a unique file extension will enable the user to double-click and load the model unambiguously into the correct application.

Job Manager Improvements

In this release, a new GUI is added to Create/Select remote services as a part of job submission dialogs. This GUI also has an advanced option to invoke the native Job Manager application from HyperWorks.

Start with Existing Mesh

The interface now supports creation of data decks with existing meshes. This will enable the user to manually create and use meshes for complex models. Meshes can be created in HyperMesh or any other mesh generator. At the time of job submission, the user can select this option, and Click2Extrude will complete the data deck by creating bearing profiles and all boundary conditions. Mesh provided by the user can be in Nastran BDF, HyperXtrude GRF, and OptiStruct FEM formats. In this release, starting from an existing mesh is not supported for coupled-OptiStruct analysis.

Localization of Material Property Dialog

Material property names are localized and translated to all supported languages.

Dynamic Unit Change in All Dialogs

When the user changes the unit system, those changes will be applied dynamically to all open dialogs.

.

Click2Extrude 2018 Polymer

General Enhancements

New File Extensions

The model files will be saved now with extension *.c2ep, where c2ep stands for “Click2Extrude Polymer”. The interface will continue to support opening old *.stmod and other geometry formats. Having a unique file extension will enable the user to double-click and load the model unambiguously into the correct application.

Job Manager Improvements

In this release, a new GUI is added to Create/Select remote services as a part of job submission dialogs. This GUI also has an advanced option to invoke the native Job Manager application from HyperWorks.

Localization of Material Property Dialog

Material property names are localized and translated to all supported languages

Dynamic Unit Change in All Dialogs

When the user changes the unit system, those changes will be applied dynamically to all open dialogs.

Simulation Parameters Saved to Model File

All simulation parameters used for the analysis are stored in the model file. These values are restored both when the model is in session and when the model is loaded back in a new session. However, when the user starts a new model from CAD data, default values for process settings will be displayed.

This entry was tagged , , , , .

Comments are closed.