자 그럼 2편 출발 해 볼까요!^^

다음은 OptiStruct으로 Linear static 해석을 위한 모델로 바깥 면 Point E 지점의 tangential stress θ−θ 값을 살펴 볼 수 있습니다.

그림18

Figure 0020-1: FE-Model with Boundary Conditions and Loadcases


Benchmark Model

예제 모델은 원기둥의 일부로 Load Case 1은 Quad8 elements (Second order) 요소를 4개 사용하여 메쉬를 만들었고 Load Case 2는 Quad4 elements (First order) 요소를 16개 사용하여 메쉬를 생성하였습니다. edge AB는 모든 translation & rotation(Fix dof 1,2,3,4,5,6)을 부여 하였고 edge AD와 BC는 z-translation & normal rotations(Fix dof 3,4,5)의 구속조건을 부여 하였습니다. 또한 Load Case 1의 경우 1.0kNm/m의 균일한 normal moment가 edge DC에 적용되었고 Load Case 2의 경우는 0.6MPa의 균일한 바깥쪽 normal pressure가 ABCD면에 적용 되었으며 접선 방향 Normal Pressure 60MPa이 edge DC에 적용 되어져 있습니다.
위의 그림을 참고 하시기 바랍니다.

The material properties are:
Young’s Modulus            210 x 10^3 MPa
Poisson’s Ratio               0.3

Linear Static Analysis Results

Viewing the Result

그림59All results are normalized with the target value (60.0 MPa)

아래표의 해석 결과 값을 참조 하시기 바랍니다.

                                      Surface Tangential Stress      Normalized with the Target
                                      θ−θ    at Point E(MPa)           Value
Load Case 1:Quad8   58.03 1.033947958
Load Case 2:Quad4   58.92 1.018329939

Model Files

The model files used in this example include
install_directory/demos/hwsolvers/optistruct/verification

/le2quad81c1.fem
/le2quad41c2.fem


Reference

NAFEMS Ltd, The Standard NAFEMS BENCHMARKS TNSB Rev. 3, NAFEMS Ltd, Scottish Enterprise Technology Park, Whitworth Building, East Kilbride, Glasgow, United Kingdom, 1990.

b12_before

b12_next